News:

Boring Rods, Probes, Ram Rods and Accessories

System-Josten

For extracting soil samples, we manufacture impact-type boring rods made of tool steel.
The outsides of these boring rods are conical along their entire length and have a removal slot of 18 or 15 mm. They’re rotated by a toggle and pulled out of the ground.
Because of their physical properties, these tools are suitable for even the most demanding conditions.

Art. No.	Article Description	Price in EUR
1001	Boring rod, effective length 1000 mm, total length 1150 mm, slot 18 mm, conical, round	195,00
1001.1	Chamfered cutting edge for boring rods	5,00
1001.2	Marking for boring rods at 10 cm intervals	5,00
1002	Boring rod, effective length 1000 mm, total length 1150 mm, slot 15 mm, conical, round	205,00
1003	Boring rod, effective length 1200 mm, total length 1350 mm, slot 18 mm, conical, round	235,00
1004	Boring rod, effective length 1200 mm, total length 1350 mm, slot 15 mm, conical, round	245,00
1005	Boring rod, effective length 1500 mm, total length 1650 mm, slot 18 mm, conical, round	270,00
1030	Toggle for lifting up and emptying the boring rod, length 300 mm	28,00
1031	Toggle for lifting up and emptying the boring rod, length 600 mm	40,00
1040	1 set of extraction probes (mineralised nitrogen boring spares) for three depths. Each borer consists of an extraction probe, an extension and the impact head with transverse borehole. The extraction probe is conical from 0 to 30 cm from a diameter of 40-38 mm. The extraction probe is conical from 30 to 60 cm from a diameter of 35 to 33 mm. The extraction probe is conical from 60 to 90 cm from a diameter of 30-28 mm. This results in no frictional resistance when extracting soil samples. All parts are made of hardened tool steel and highly durable. These tools have been designed for especially hard ground.	640,00
1041	Probe, effective length 0-30 cm, outside diameter 40-38 mm, conical	138,00
1042	Extension for the 0-30 cm probe	40,00
1043	Probe, effective length 30-60 cm, outside diameter 35-33 mm, conical	138,00
1044	Extension for the 30-60 cm probe	40,00
1045	Probe, effective length 60-90 cm, outside diameter 30-28 mm, conical	138,00
1046	Extension for the 60-90 cm probe	40,00
1049	Impact head with transverse borehole	52,00
1050	Impact rod with shrunken impact head for extracting soil samples up to 2 m deep, Ø 15 mm, slot 8x8 mm. The impact rod is used with the impact boring rod NL 1000 (Art. No. 1001).	245,00
1051	Chisel for scraping off and clearing the soil sample, 18 mm, round	18,00
1052	Chisel for scraping off and clearing the soil sample, 15 mm, round	18,00
1053	Chisel for scraping off and clearing the soil sample, 15 mm, square	18,00
1054	Chisel for scraping off and clearing the soil sample, 8 mm, square	18,00
1055	Chisel for scraping off and clearing the soil sample, 12 mm, square	18,00
1060	Impact-Lifting-Combination for impact boring and ram rods 2 m (square hammer, draw hook and draw ring). Hammer impact area 135x135 mm, 200 mm long, weight approx. 4300 g. The hammer shaft is made of plastic and is flattened and has milled holding grooves for the draw ring over its entire length. The draw hook is used as a toggle, lifting rod and for clearing the slot. At the end of the hammer shaft there is a milled slot that can be used as a boring rod support while cleaning.	320,00
1061	Square hammer, complete	175,00
1064	Draw ring	35,00
1065	Draw hook	118,00
1085	Stainless steel soil probe for locating compacted earth, ground layers. Effective length 1000 mm with marks at 100 mm intervals, 8 mm Ø.	46,00

* All prices are without applicable taxes or VAT, shipping and packaging not included.

Startpage |

Company Information / Legal Advisory | Login

Log-in page | German

German |

Russian